HPE OfficeConnect 1410 Switch Switch Series - Specifications

HPE OfficeConnect 1410 Switch-8G Switch (J9559A)

Feature	Specification
Ports	8 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
Physical characteristics	Dimensions (d) x (w) x (h)	9.65 x 15.6 x 2.45 cm (3.8 x 6.14 x 0.96 in) (.5U height)
Physical characteristics	Weight	0.34 kg (.74 lb)
Memory and processor	4Kb EEPROM capacity; packet buffer size: 192KB
Mounting	Wall, desktop, and undertable mounting
Performance	100Mb Latency	< 3.6 ?s (LIFO 64-byte packets)
	1000Mb Latency	< 1.2 ?s (LIFO 64-byte packets)
	Throughput	up to 11.9 million p/s (64-byte packets)
	Switching capacity	16 Gb/s
	MAC address table size	4096 entries
Environment	Operating temperature	0º to 40ºC (32º to 104ºF)
	Operating relativehumidity	15% to 95% @ 40ºC (104ºF), noncondensing
	Nonoperating/Storagetemperature	-40º to 70ºC (-40º to 158ºF)
	Nonoperating/Storagerelative humidity	15% to 90% @ 65ºC (149ºF), noncondensing
	Altitude	up to 3 km (10,000 ft)
	Acoustic	Power: 0 dB No Fan
Electrical characteristics	Maximum heat dissipation	43.26 kJ/hr (41 BTU/hr)
	Voltage	100-240 V ac
	Current	1.0 A
	Maximum power rating	12 W
	Frequency	50/60 Hz
	Notes	Maximum power rating and maximum heat dissipation are the worst-casetheoretical maximum numbers provided for planning the infrastructure withfully loaded PoE (if equipped), 100% traffic, all ports plugged in, and allmodules populated. The exact input voltage and frequency rating are determined by the specificpower adapter part number ordered. Please select the correct power adaptercountry option.
Safety	CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950-1
Emissions	FCC Rules Part 15, Subpart B Class A
Immunity	Generic	EN 55022 CISPR 22
	EN	EN 55024, CISPR 24
	ESD	IEC 61000-4-2
	Radiated	IEC 61000-4-3
	EFT/Burst	IEC 61000-4-4
	Surge	IEC 61000-4-5
	Conducted	IEC 61000-4-6
	Power frequencymagnetic field	IEC 61000-4-8
	Voltage dips andinterruptions	IEC 61000-4-11
	Harmonics	IEC 61000-3-2
	Flicker	IEC 61000-3-3

top

HPE OfficeConnect 1410 24G R Switch (JG708A)

Feature	Specification
Ports	24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,IEEE 802.3ab Type 1000BASE-T) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full;1000BASE-T: full onlySupports a maximum of 24 autosensing 10/100/1000 ports
Physical characteristics	Dimensions (d) x (w) x (h)	17.3 x 44 x 4.4 cm (6.81 x 17.32 x 1.73 in) (1U height)
Physical characteristics	Weight	3 kg (6.61 lb)
Memory and processor	4Kb EEPROM capacity; packet buffer size: 512 KB
Mounting	Mounts in an EIA standard 19-inch telco rack (hardware included); desktop mounting
Performance	100Mb Latency	< 8.0 ?s (LIFO 64-byte packets)
	1000Mb Latency	< 3.6 ?s (LIFO 64-byte packets)
	Throughput	up to 35.7 million p/s (64-byte packets)
	Switching capacity	48 Gb/s
	MAC address table size	8192 entries
Environment	Operating temperature	0º to 40ºC (32º to 104ºF)
	Operating relativehumidity	5% to 95% @ 104°F (40°C), noncondensing
	Nonoperating/Storagetemperature	-40º to 70ºC (-40º to 158ºF)
	Nonoperating/Storagerelative humidity	5% to 90% @ 149°F (65°C), noncondensing
	Altitude	up to 5 km (16,404 ft)
	Acoustic	Power: 0 dB No Fan
Electrical characteristics	Maximum heat dissipation	55 BTU/hr (58 kJ/hr)
	Voltage	100-240 V ac
	Current	0.3 A
	Maximum power rating	16 W
	Frequency	50/60 Hz
	Notes	Maximum power rating and maximum heat dissipation are the worst-casetheoretical maximum numbers provided for planning the infrastructure withfully loaded PoE (if equipped), 100% traffic, all ports plugged in, and allmodules populated. The exact input voltage and frequency rating are determined by the specificpower adapter part number ordered. Please select the correct power adaptercountry option.
Safety	CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950-1
Emissions	FCC Rules Part 15, Subpart B Class A
Immunity	Generic	EN 55022 CISPR 22
	EN	EN 55024, CISPR 24
	ESD	IEC 61000-4-2
	Radiated	IEC 61000-4-3
	EFT/Burst	IEC 61000-4-4
	Surge	IEC 61000-4-5
	Conducted	IEC 61000-4-6
	Power frequencymagnetic field	IEC 61000-4-8
	Voltage dips andinterruptions	IEC 61000-4-11
	Harmonics	IEC 61000-3-2
	Flicker	IEC 61000-3-3

top

HPE OfficeConnect 1410 Switch-8 Switch (J9661A)

Feature	Specification
Ports	Supports a maximum of 8 autosensing 10/100 ports
Physical characteristics	Dimensions (d) x (w) x (h)	9.5 x 15.6 x 2.46 cm (3.74 x 6.14 x 0.97 in)
Physical characteristics	Weight	0.34 kg (0.74 lb)
Memory and processor	96KB
Mounting	Wall, desktop, and under-table mounting
Performance	100Mb Latency	< 3.7 ?s (LIFO 64-byte packets)
	Throughput	up to 1.1 million p/s (64-byte packets)
	Switching capacity	1.6 Gb/s
	MAC address table size	1040 entries
Environment	Operating temperature	0º to 40ºC (32º to 104ºF)
	Operating relativehumidity	15% to 95% @ 40ºC (104ºF), noncondensing
	Nonoperating/Storagetemperature	-40º to 70ºC (-40º to 158ºF)
	Nonoperating/Storagerelative humidity	15% to 90% @ 65ºC (149ºF), noncondensing
	Altitude	up to 3 km (10,000 ft)
	Acoustic	Power: 0 dB
Electrical characteristics	Maximum heat dissipation	13.72 kJ/hr (13 BTU/hr)
	Voltage	100-240 V ac
	Current	0.3 A
	Maximum power rating	3.6 W
	Frequency	50/60 Hz
	Notes	Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. The exact input voltage and frequency rating are determined by the specific power adapter part number ordered. Please select the correct power adapter country option.
Safety	UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
Emissions	FCC Rules Part 15, Subpart B Class A
Immunity	Generic	EN 55022 CISPR 22
	EN	EN 55024, CISPR 24
	ESD	IEC 61000-4-2
	Radiated	IEC 61000-4-3
	EFT/Burst	IEC 61000-4-4
	Surge	IEC 61000-4-5
	Conducted	IEC 61000-4-6
	Power frequencymagnetic field	IEC 61000-4-8
	Voltage dips andinterruptions	IEC 61000-4-11
	Harmonics	IEC 61000-3-2
	Flicker	IEC 61000-3-3

top

HPE OfficeConnect 1410 Switch-16 Switch (J9662A)

Feature	Specification
Ports	Supports a maximum of 16 autosensing 10/100 ports
Physical characteristics	Dimensions (d) x (w) x (h)	10.7 x 20.85 x 4.4 cm (4.21 x 8.21 x 1.73 in)
Physical characteristics	Weight	0.65 kg (1.43 lb)
Memory and processor	16KB EEPROM; packet buffer size: 2MB
Mounting	Mounts in an EIA-standard 19 in. telco rack (hardware included); wall, desktop, and under-table mounting
Performance	100Mb Latency	< 10.6 ?s (LIFO 64-byte packets)
	Throughput	up to 2.3 million p/s (64-byte packets)
	Switching capacity	3.2 Gb/s
	MAC address table size	8192 entries
Environment	Operating temperature	0º to 40ºC (32º to 104ºF)
	Operating relativehumidity	15% to 95% @ 40ºC (104ºF), noncondensing
	Nonoperating/Storagetemperature	-40º to 70ºC (-40º to 158ºF)
	Nonoperating/Storagerelative humidity	15% to 90% @ 65ºC (149ºF), noncondensing
	Altitude	up to 3 km (10,000 ft)
	Acoustic	Power: 0 dB
Electrical characteristics	Maximum heat dissipation	13.72 kJ/hr (13 BTU/hr)
	Voltage	100-240 V ac
	Current	0.3 A
	Maximum power rating	3.6 W
	Frequency	50/60 Hz
	Notes	Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. The exact input voltage and frequency rating are determined by the specific power adapter part number ordered. Please select the correct power adapter country option.
Safety	UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
Emissions	FCC Rules Part 15, Subpart B Class A
Immunity	Generic	EN 55022 CISPR 22
	EN	EN 55024, CISPR 24
	ESD	IEC 61000-4-2
	Radiated	IEC 61000-4-3
	EFT/Burst	IEC 61000-4-4
	Surge	IEC 61000-4-5
	Conducted	IEC 61000-4-6
	Power frequencymagnetic field	IEC 61000-4-8
	Voltage dips andinterruptions	IEC 61000-4-11
	Harmonics	IEC 61000-3-2
	Flicker	IEC 61000-3-3
Notes	IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HPE OfficeConnect 1410 Switch-16 (J9662A) and HPE OfficeConnect 1410 Switch-24 (J9663A) Switches only.

top

HPE OfficeConnect 1410 Switch-24 Switch (J9663A)

Feature	Specification
Ports	Supports a maximum of 24 autosensing 10/100 ports
Physical characteristics	Dimensions (d) x (w) x (h)	16.9 x 33.6 x 4.4 cm (6.65 x 13.23 x 1.73 in)
Physical characteristics	Weight	1.35 kg (2.98 lb)
Memory and processor	16KB EEPROM; packet buffer size: 2MB
Mounting	Mounts in an EIA-standard 19 in. telco rack (hardware included); wall, desktop, and under-table mounting
Performance	100Mb Latency	< 11 ?s (LIFO 64-byte packets)
	Throughput	up to 3.5 million p/s (64-byte packets)
	Switching capacity	4.8 Gb/s
	MAC address table size	8192 entries
Environment	Operating temperature	0º to 40ºC (32º to 104ºF)
	Operating relativehumidity	15% to 95% @ 40ºC (104ºF), noncondensing
	Nonoperating/Storagetemperature	-40º to 70ºC (-40º to 158ºF)
	Nonoperating/Storagerelative humidity	15% to 90% @ 65ºC (149ºF), noncondensing
	Altitude	up to 3 km (10,000 ft)
	Acoustic	Power: 0 dB
Electrical characteristics	Maximum heat dissipation	17.93 kJ/hr (17 BTU/hr)
	Voltage	100-240 V ac
	DC voltage	12 V
	Current	0.4 A
	Maximum power rating	4.8 W
	Frequency	50/60 Hz
	Notes	Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. The exact input voltage and frequency rating are determined by the specific power adapter part number ordered. Please select the correct power adapter country option.
Safety	UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
Emissions	FCC Rules Part 15, Subpart B Class A
Immunity	Generic	EN 55022 CISPR 22
	EN	EN 55024, CISPR 24
	ESD	IEC 61000-4-2
	Radiated	IEC 61000-4-3
	EFT/Burst	IEC 61000-4-4
	Surge	IEC 61000-4-5
	Conducted	IEC 61000-4-6
	Power frequencymagnetic field	IEC 61000-4-8
	Voltage dips andinterruptions	IEC 61000-4-11
	Harmonics	IEC 61000-3-2
	Flicker	IEC 61000-3-3
Notes	IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HPE OfficeConnect 1410 Switch-16 (J9662A) and HPE OfficeConnect 1410 Switch-24 (J9663A) Switches only.

top

HPE OfficeConnect 1410 Switch-24-R Switch (JD986B)

Feature	Specification
Ports	24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full onlySupports a maximum of 24 autosensing 10/100 ports
Physical characteristics	Dimensions (d) x (w) x (h)	44 x 17.3 x 4.4 cm (17.32 x 6.81 x 1.73 in)
Physical characteristics	Weight	2.0 kg (4.41 lb)
Memory and processor	1KB EEPROM; packet buffer size: 2MB
Mounting	Mounts in an EIA standard 19-inch telco rack (hardware included); desktop mounting
Performance	100Mb Latency	< 11 ?s (LIFO 64-byte packets)
	Throughput	up to 3.5 Kp/s (64-byte packets)
	Switching capacity	4.8 Gb/s
	MAC address table size	8192 entries
Environment	Operating temperature	0º to 40ºC (32º to 104ºF)
	Operating relativehumidity	15% to 95% @ 40ºC (104ºF), noncondensing
	Nonoperating/Storagetemperature	-40º to 70ºC (-40º to 158ºF)
	Nonoperating/Storagerelative humidity	15% to 90% @ 65ºC (149ºF), noncondensing
	Altitude	up to 5 km (16,404 ft)
	Acoustic	Power: 0 dB
Electrical characteristics	Maximum heat dissipation	22 kJ/hr (21 BTU/hr)
	Voltage	100-240 V ac
	DC voltage	3.3 V
	Current	1.1 A
	Maximum power rating	3.6 W
	Frequency	50/60 Hz
	Notes	Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. This model provides an internal power supply. Please select the correct power cord country option.
Safety	UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
Emissions	FCC Rules Part 15, Subpart B Class A
Immunity	Generic	EN 55022 CISPR 22
	EN	EN 55024, CISPR 24
	ESD	IEC 61000-4-2
	Radiated	IEC 61000-4-3
	EFT/Burst	IEC 61000-4-4
	Surge	IEC 61000-4-5
	Conducted	IEC 61000-4-6
	Power frequencymagnetic field	IEC 61000-4-8
	Voltage dips andinterruptions	IEC 61000-4-11
	Harmonics	IEC 61000-3-2
	Flicker	IEC 61000-3-3

top

HPE OfficeConnect 1410 Switch-24-2G Switch (J9664A)

Feature	Specification
Ports	Supports a maximum of 24 autosensing 10/100 ports plus 2 autosensing 10/100/1000 ports, or a combination
Physical characteristics	Dimensions (d) x (w) x (h)	16.9 x 33.6 x 4.4 cm (6.65 x 13.23 x 1.73 in)
Physical characteristics	Weight	1.35 kg (2.98 lb)
Memory and processor	2 KB EEPROM; packet buffer size: 2.5 Mb
Mounting	Mounts in an EIA-standard 19 in. telco rack (hardware included); wall, desktop, and under-table mounting
Performance	100Mb Latency	< 5.6 ?s (LIFO 64-byte packets)
	1000Mb Latency	< 2.2 ?s (LIFO 64-byte packets)
	Throughput	up to 6.5 million p/s (64-byte packets)
	Switching capacity	8.8 Gb/s
	MAC address table size	8192 entries
Environment	Operating temperature	0º to 40ºC (32º to 104ºF)
	Operating relativehumidity	15% to 95% @ 40ºC (104ºF), noncondensing
	Nonoperating/Storagetemperature	-40º to 70ºC (-40º to 158ºF)
	Nonoperating/Storagerelative humidity	15% to 90% @ 65ºC (149ºF), noncondensing
	Altitude	up to 3 km (10,000 ft)
	Acoustic	Power: 0 dB
Electrical characteristics	Maximum heat dissipation	39.03 kJ/hr (37 BTU/hr)
	Voltage	100-240 V ac
	DC voltage	12 V
	Current	0.9 A
	Maximum power rating	10.8 W
	Frequency	50/60 Hz
	Notes	Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. The exact input voltage and frequency rating are determined by the specific power adapter part number ordered. Please select the correct power adapter country option.
Safety	UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
Emissions	FCC Rules Part 15, Subpart B Class A
Immunity	Generic	EN 55022 CISPR 22
	EN	EN 55024, CISPR 24
	ESD	IEC 61000-4-2
	Radiated	IEC 61000-4-3
	EFT/Burst	IEC 61000-4-4
	Surge	IEC 61000-4-5
	Conducted	IEC 61000-4-6
	Power frequencymagnetic field	IEC 61000-4-8
	Voltage dips andinterruptions	IEC 61000-4-11
	Harmonics	IEC 61000-3-2
	Flicker	IEC 61000-3-3

top

Standards and protocols

NOTE: Applies to all products inseries.

Feature	Specification
General protocols	IEEE 802.1p Priority IEEE 802.3x Flow Control

top

Link to product overview information

Click here to view the product overview page .

top

List of available documents for the HPE OfficeConnect 1410

Click here to view a list of documents available for the HPE OfficeConnect 1410 Series .

top

©Copyright 2023 Hewlett Packard Enterprise Development LP Hewlett Packard Enterprise Development shall not be liable for technical or editorial errors or omissions contained herein. The information provided is provided "as is" without warranty of any kind. To the extent permitted by law, neither HPE nor its affiliates, subcontractors or suppliers will be liable for incidental, special or consequential damages including downtime cost; lost profits; damages relating to the procurement of substitute products or services; or damages for loss of data, or software restoration. The information in this document is subject to change without notice. Hewlett Packard Enterprise Development and the names of Hewlett Packard Enterprise Development products referenced herein are trademarks of Hewlett Packard Enterprise Development in the United States and other countries. Other product and company names mentioned herein may be trademarks of their respective owners.

Support Center